Cambo WRS-1060 Instruction Manual

Please read this manual carefully before using the Cambo WRS-1060 holder!
CAUTION: Tighten the clamping knob with care, do not over tighten the clamp!
CAUTION: Before use ensure that the Iphone
The Cambo WRS-1060 holder is compatible with the Apple
WRS-1095 shoe mount adapter
The WRS-1090 can be mounted directly to the Cambo WRS-
1200 series.
For camera's that feature a accessory shoe mount, the WRS-
1095 shoe adapter can be used.
For the Cambo Anniversary Edition camera the WRS-1096
WRS-AE adapter can be used.
The centring pins ensure a correct alignment of the Iphone
holder.
Before inserting the Iphone
the clamp by turning "knob B" counter-clockwise. When the
clamp part is all the way up, now you can gently insert the
®
Iphone 4/4s in the holder (as displayed in the image above).
Note: when the volume knobs are pressed, the Iphone is not parallel to the holder, please adjust the alignment of the Iphone
WRS-1096 WRS-AE adapter
®
4/4s in the holder please loosen
INSTRUCTION MANUAL
®
is mounted correctly!
® ®
Iphone 4 and 4s.
First tighten the right screw
using a flat screw driver or a
long Allen key (3mm)
®
Knob B
®
When the Iphone
that the backside of the Iphone
holder. Now you can gently tighten "knob B", don't over tighten
the clamp!, this could damage your Iphone
Instruction Manual WRS-1060 Iphone 4 and 4s Viewfinder
WRS-1060
Viewfinder Iphone
Flip the holder 90⁰ by pressing
the "lock A", please tighten the
second screw.
is fully inserted in the holder, please ensure
®
is parallel to and touching the
®
.
®
4/4s Viewfinder
EN
Lock A
®
.
1