Cambo AC-371 Instruction Manual page 5

4. Reassembling the front standard
Figure 4. Installing the spacers.(Left, Actus-B, Right, Actus-G and Actus-DB)
For the Actus-B place the 21,5mm spacer [8] below the front standard and fix
both to the Actus rail at the same time using the supplied M3x35 ISO14581
Torx screws [9] using the Torx T10 key [3].
For the Actus-G and –DB place the supplied 21,5mm spacer [8] and the original
16,3mm spacer [1] below the front standard and fix all three to the Actus rail
with the supplied M3x55 ISO14581 Torx screws [10] using the Torx T10 Key.
5