Advertisement
Thank you for purchasing a Cambo product
The AC-371 rear base tilt kit is an additional kit to the Actus-B, Actus-G or
Actus-DB. This kit allows the rear standard to tilt +15º / -15º with fixed
increments of 5º. The AC-371 also extends the telescopic rail system with
42mm extra travel.
Please read this manual carefully before converting your Actus-B, -G or –DB.
Please take all warnings concerning the use of standard Actus systems into
account when using an Actus fit with the AC-371 kit. Note that the AC-371 is
compatible with all three Actus systems so the images displayed in this manual
may differ from the Actus system you own.
1.
Removing the Front standard
Figure 1. Removing the front standard.
2
To remove the front standard [1],
unscrew the four M3 Torx bolts [2]
using the supplied Torx T10 key [3].
Note that the front standard of the
Actus-G and Actus-DB have an extra
16,3mm spacer which is not displayed
in Figure 1. (See fig.2 [1])
Advertisement
