Advertisement
Annex 1: Table of control series
No.
Control series
1 : 1 : 1 : 1 : 1 : 1
1
2
1 : 2 : 2 : 2 : 2 : 2
3
1 : 2 : 3 : 3 : 3 : 3
1 : 2 : 3 : 4 : 4 : 4
4
5
1 : 2 : 4 : 4 : 4 : 4
6
1 : 2 : 3 : 6 : 6 : 6
7
1 : 2 : 4 : 8 : 8 : 8
8
1 : 1 : 1 : 1 : 2 : 2
9
1 : 1 : 1 : 1 : 1 : 6
10
1 : 1 : 2 : 2 : 2 : 2
11
1 : 1 : 2 : 2 : 2 : 4
12
1 : 1 : 2 : 2 : 4 : 4
13
1 : 1 : 1 : 2 : 2 : 2
14
1 : 1 : 2 : 3 : 3 : 3
15
1 : 1 : 2 : 4 : 4 : 4
16
1 : 1 : 2 : 4 : 8 : 8
1 : 2 : 2 : 3 : 3 : 3
17
18
1 : 2 : 3 : 4 : 4 : 8
19
1 : 2 : 2 : 4 : 4 : 4
20
1 : 2 : 2 : 2 : 4 : 4
"E"
Control-series editor
Control -series editor (programming up to a rating of 30)
The control-series editor allows the user to simply define his/her own control series if the
required control series is not available for any reason.
The last control series - Control Series E - is selected by pressing the "Programming" key
(point 4: Control series) and confirmed with ENTER. This leads to the insertion of an
additional menu point in the main menu -> the control-series editor. It may be reached
via the "Operating Mode" key.
Automatic
Programming
In the control-series editor, all stages can be set in succession to the desired value with
the selection keys é / ê. The next stage in each case is reached by pressing ENTER.
In the control series editor, the various steps may be programmed up to a rating of 30 (!).
The rating >9 is indicated in the display as follows:
10=A, 11=B, 12=C, 13=D, 14=E, 15=F, 16=G .... 30=U
ALL control series can be generated (even downwards). The customer will decide
whether the generated control series is of sense.
The maximum number of stages can be limited by a programmed END STOPP < 6
Control series
Manual operation
editor
- 18 -
Prophi
6T
®
Loop connection
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Service
Expert mode
19
Advertisement
