Page 1
Ladder Shelving Assembly Instructions 011 xx 9411 - Please keep for future reference Dimensions Width - 63.0cm Depth - 40.3cm Height - 180cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08450613967 Please turn to back page for important information when contacting Customer Helpline.
Page 2
Safety and Care Advice Important - Please read these instructions fully before starting assembly Do not stand or put weight on Check you have all the We do not the product, this could cause components and tools listed on recommend the damage.
Page 3
Components - Panels Please check you have all the panels listed below Important - Thick lines indicate finished edges Backpanel Right hand end (180x28.8cm) Left hand end (183.5x10.2cm) (183.5x10.2cm) Code - 1357 Code - 1356 Code - 1355 Shelf (60x27.4cm) Shelf (60x21.8cm) Code -...
Page 5
If you have damaged or missing components, call the Components-Fittings Customer Helpline: 0845 0613967 Please turn to back page for important information when contacting Customer Helpline. Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly, In some case more fittings may be supplied than are required.
Page 6
Assembly Instructions Step 1 Fittings you will need for this step: Fitting dowels to left and right hand ends (x16) 1356 Note: Insert metal dowels as far as shown by arrows. Do not over tighten. 1355 Step 2 Fittings you will need for this step: Fitting dowels into the back rail.
Page 7
Assembly Instructions Step 3 Fittings you will need for this step: Fitting cams to the shelf panels. Large (x24) 1359 1358 Note: Ensure cam arrow points towards the edge with hole. 1360 1361 Step 4 Attach shelves to back rail. Locate dowels in back rail...
Page 8
Assembly Instructions Step 5 Attatch left and right hand ends to shelf panels. Locate dowels b in the 1355 and RH end 1356 into cams on shelf panels 1358 1359 1360 1361 Turn cam 180 degrees to lock 1356 Stand unit upright. 1361 Important: 2 people required...
Page 9
Assembly Instructions Step 6 Fittings you will need for this step: WARNING Fixing to wall IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH (x4) (x2) THE WALL ATTACHMENT DEVICE We recommend that this PROVIDED unit is fixed to a suitable Serious or fatal crushing injuries can occur from wall to prevent possible furniture tipping over.
Page 10
Assembly Instructions Congratulations! Your unit is complete. Important Information If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123 8am - 4.30pm (Monday to Thursday) 8am - 2.30pm (Fridays) (by contacting the customer service line your statutory rights are not affected) Please have the following information to hand: >>...