6Axb - Canon WUX500ST User Commands

6AXB

6-axis adjustment (blue), hue/saturation/brightness
Format
Setting Command
Response
Reference Command
Response
<B hue:Number> is within -20 to 20.
<B saturation:Number> is within -20 to 20.
<B brightness:Number> is within -20 to 20.
Environment
Power mode restriction
LAN
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB
No No No No Yes No No No No Yes No No Yes
Remarks
(1) When 6-axis adjustment is turned on, these settings are shown over the displayed image. However,
the settings can be changed regardless of whether 6-axis adjustment is turned on or not.
(2) This sets the currently selected input signal and image mode.
Example
(Setting)
>6AXB=-8,5,3
< i:OK
(Reference)
> GET=6AXB
< g:6AXB=-8,5,3
Note: '>' indicates a command; '<' indicates a response.
6AXB=<B hue:Number>,<B saturation:Number>,<B
brightness:Number>
i:OK
GET=6AXB
g:6AXB=<B hue:Number>,<B saturation:Number>,<B
brightness:Number>
Note: See "Error list" for any response other than the above.
WiFi RS-232C
Yes
-18-
WUX500ST User Commands
Input
Yes Yes Yes Yes Yes Yes
No
signal Yes