Signal_Info - Canon WUX500ST User Commands

SIGNAL_INFO

Displayed signal information inquiry
Format
Setting Command
Response
Reference Command
Response
Environment
Power mode restriction
LAN
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB
No No No No Yes No No No No Yes No No Yes
Remarks
(1) For USB or LAN, g:SIGNAL_INFO="" is returned even when an image is displayed.
(2) e:1011 FUNCTION_NOT_AVAILABLE is returned while a test pattern is displayed.
Example
> GET=SIGNAL_INFO
< g:SIGNAL_INFO="1920 x 1200 60"
Note: '>' indicates a command; '<' indicates a response.
-
-
GET=SIGNAL_INFO
g:SIGNAL_INFO="<Input signal information:Character string>
Note: See "Error list" for any response other than the above.
WiFi RS-232C
Yes
-85-
WUX500ST User Commands
Input
Yes Yes Yes Yes Yes Yes
No
signal Yes