Power - Canon WUX500ST User Commands

POWER

Power supply control
Format
Setting Command
Response
Reference Command
Response
< Power control parameter:ID >
Parameter
ON
OFF
< Power mode parameter:ID >
Parameter
OFF
OFF2ON
ON
ON2OFF
PMM
PMM2ON
ON2OFF
Environment
Power mode restriction
LAN
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB
No Yes Yes Yes Yes No No No No Yes Yes Yes Yes
Remarks
(1) "Lamp Replacement Preparation", "Lamp Replacement Warning" and "Air Filter Cleaning Warning"
are displayed for 10 seconds, regardless of whether the projector was started by the button or
command.
(2) Note that there are different parameters for the setting command and the reference command.
Example
(Control)
>POWER=ON
<i:OK
(Reference)
>GET=POWER
< g:POWER=OFF
Note: '>' indicates a command; '<' indicates a response.
POWER=<power control parameter:ID>
i:OK
GET= POWER
g: POWER = < Power mode parameter:ID >
Note: See "Error list" for any response other than the above.
Meaning
Power ON
Power OFF
Meaning
Power OFF
OFF -> ON in transition
Power ON
ON -> OFF in transition
Lamp OFF
Lamp OFF -> ON in transition
ON -> OFF in transition
WiFi RS-232C
Yes
-73-
WUX500ST User Commands
Input
Yes Yes Yes Yes Yes Yes
No
signal Yes