74
Connecting Other External Devices
Adding memory
12
13
Removing the sample metal brace
14
15
Installing the sample memory module in the primary slot
Remove the retaining screw and the metal brace. Place
the screw in a safe place so that you can retrieve it later.
Remove the existing memory module from the slot by
pulling the clips away from the memory module. Place
the module in antistatic packaging and store it in a safe
place.
Remove the new memory module from its antistatic
packaging.
Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the socket
so it lies flat and is secured by two latches on either side.
The clips on either side of the module will click to secure the
module.