Inserting A Pc Card - Toshiba Tecra M2V Series User Manual

82
Connecting Other External Devices
Inserting and removing PC Cards

Inserting a PC Card

Before you insert a PC Card, refer to the documentation that
comes with the card to see if you need to do anything before
you insert it.
There are three different ways to insert a PC Card:
Turn off the computer and follow the steps below.
Insert the PC card while the computer is running. Follow
the steps below.
Hot swap the card (choose this method if there is already
a PC Card in slot you wish to use). Stop the PC Card by
clicking the Safely Remove Hardware icon on the
System tray. After the PC Card stops, it is safe to remove
it. Follow the steps below.
1 Locate the PC Card slot on the left side of the computer.
If you are hot swapping a PC Card, see
Card" on page
2 Insert the PC Card.
If you have a Type III card, insert it into the lower part of the
slot. If you have a Type I or Type II card, insert it into either
the upper or lower part of the slot.
Inserting the sample PC Card
83, steps 3 through 4.
"Removing a PC