Closing The Display Panel - Toshiba Tecra M2V Series User Manual

computer is off) to fully charge the main battery. With the
computer off, it may take up to three hours to recharge the
main battery.
When you power down the computer, you have three options
to choose from: Turn Off (or Shut down), Hibernate, and
Standby. Each option has its advantages.
Use the Shut down command if you are using the
Windows XP Professional operating system and
connected to a domain server.
If you have work in progress and are not connected to a
network, use the Windows
commands to save your system settings to memory so
that, when you turn on the computer again, you will
automatically return to where you left off.
Use the Turn Off command if you are using the
Windows
connected to a domain server.

Closing the display panel

When you are finished, shut the computer down and close the
display panel to keep dust and dirt out of the computer.
If you close the computer while it is still on, these actions will
occur:
If you have the LCD power-saver feature set, the LCD
panel will automatically turn off until you open it again.
If you have the audible warning set, the computer will
beep to notify you that it is still on.
® XP Professional operating system when not
Never turn off the computer while any drive is in use. Doing so
may damage the media in use and result in loss of data.
Getting Started
Turning off the computer
® Standby or Hibernate
55