To Verify The Scenario Projection Status On A Computer - Epson EMP-7850 Operation Manual

Creating and Sending a Scenario
f To Verify the Scenario Projection Status on a Computer
It is possible to verify on a computer how a created scenario will project
when played back on a projector by using the CardPlayer. All the structural
elements of the scenario such as graphics, animation, background music,
etc. will be played.
PROCEDURE
1 Open the scenario to verify in EMP SlideMaker2.
2
Select "Scenario Option" - "Scenario Preview".
3 The Scenario Preview screen is displayed. Operate
the scenario referring to the following table.
Stop Pause Play
Status Bar
Volume
Rewind FF
Stop Stop play and return to the first slide.
Pause Temporarily stops the slides when "Automatically" is
selected for "Advance". s
Play
Starts the scenario preview. In addition, this restarts
stopped or paused scenarios. The following slide is
displayed when "Advance" is set to "On mouse click".
s
p.13
Rewind Returns the slide to the one previous to the currently
displayed slide or returns the screen previous to the
animation being executed. The animation effects are not
performed upon return.
Fast Shows the next slide (one after the current slide) or shows
Forward (FF)
the screen after animation execution. At this time the
animation effects are not executed.
Volume
Performs volume control. Sets the level of the background
music.
Status Bar Displays the state of progress of the scenario on a bar. At
first there is no bar display, and then the bar extends from
left to right as the scenario progresses. The scenario ends at
the rightward end of the bar.
4
After verification is complete, click the " " button at
the top right of the screen to close the Scenario
Preview screen.
EasyMP Operation Guide
11
p.13