Epson EMP-7850 Operation Manual page 37

Setting, Monitoring and Controlling from a Computer
High-speed cooling in
progress
Lamp cover is open
error
Internal temperature
(overheating)
Internal error problem
Fan related error
Sensor error
9 It is possible to turn power ON/OFF and switch input
signals for registered projectors simultaneously.
Select the projectors to be controlled, and click the
desired operation button.
To select all the registered projectors, click the "Select all" button.
Furthermore, just as in Windows file selection, it is possible to click
the top of a range, then click the bottom whilst pressing the [Shift]
key on the keyboard to select everything in between. Selection and
deselection can be performed by alternately clicking whilst pressing
the [Ctrl] key.
s "Reading the Indicators" in the User's
Guide to remedy problems.
The buttons and their operation are shown below.
"View details" This displays detailed information for the selected
button
projector.
Power ON
Turns the projector power on.
Power OFF
Turns the projector power off.
Computer Changes the video signal to the [Computer] port.
BNC Changes the video signal to the [BNC] port.
S-Video Changes the video signal to the [S-Video] port.
Video
Changes the video signal to the [Video] port.
g
DVI
Changes the video signal to the [DVI] port.
EasyMP
Switches the display to EasyMP.
10 To end, select "File" - "Close" or click the " " button.
EasyMP Operation Guide
36