Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
This kit contains the same components as
Sportsman (XP) winch kit (PN 2882241), but have
been pre-assembled differently. If you need to install
this kit on a Sportsman (XP) vehicle, refer to image
below that shows the contactor location and wire
routing for Sportsman (XP) winch kit, and
reassemble the contactor and wiring to match below
image. You will need to download instructions
manual (PN 9927474) and follow those instructions
for final installation.
* ABOVE IMAGE REFERS TO KIT PN 2882241
PREPARATION
1. Place vehicle in "PARK". Turn key to "OFF"
position and remove from vehicle.
2. Detach the rubber latch
A
front rack
.
NOTE
B
on both sides to open
Instr 9927475
3. Open the front rack
4. Remove four screws
place. Retain the screws
Rev 01 2017-02
Page 3 of 14
A
and remove rubber seal
D
holding front cover
D
for reinstallation.
C
.
E
in
Advertisement
Table of Contents
