Using Hibernation
Enabling the Hibernation command
Hibernation is a default setting. If it should become disabled,
you can enable it as follows:
1
Click Start, Control Panel.
The Control Panel window appears.
2
Click Performance and Maintenance.
3
Click the TOSHIBA Power Saver icon.
The TOSHIBA Power Saver Properties window appears.
4
Click on the Setup Action tab.
Sample TOSHIBA Power Saver Properties window
5
Select the options you want from the drop-down lists.
When I press the power button
Set this option to Shutdown if you want the
computer to turn off when you press the power
button.
Learning the Basics
Using Hibernation
107