Table of Contents
Advertisement
108
Learning the Basics
Using Hibernation
6
Click Apply.
7
Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.
Going into Hibernation mode
If you are not connected to a Windows
(domain server), power off the computer using the
Hibernation command as follows:
1
Click Start, Turn off computer.
The Turn off computer window appears.
Sample Turn off computer window with shift key held down to
show Hibernate option
2
Hold down the shift key and click Hibernate
("Hibernate" only appears when the shift key is pressed).
The computer saves the state of the system, including all open
programs and files, to the hard disk, and then powers down
completely.
If you are connected to a Windows
server), follow these steps to power down the computer using
Hibernation:
When I close the lid
Set this option to Shutdown if you want the
computer to turn off when you close the display
panel.
®
network server
®
network server (domain
Advertisement
Table of Contents
