Charging The Battery - Toro Groundsmaster 4300-D Operator's Manual

Figure 81
1. Fuse block
Figure 82
1. Read the Operator's Manual.
2. Power point (10 A)
3. Head lights (10 A)
4. Power (10 A)
5. Engine start (15 A)
6. Optional air ride seat suspension (20 A)
7. Engine computer management C (7.5 A)
8. Engine computer management B (7.5 A)
9. Engine computer management A (7.5 A)

Charging the Battery

WARNING
Charging the battery produces gasses that
can explode.
Do not smoke near the battery, and keep
sparks and flames away from the battery.
Important:
is especially important to prevent battery damage
when the temperature is below 0°C (32°F).
g021219 1. Clean the exterior of the battery case and the
battery posts.
Note:
to battery posts before connecting the charger
to the electrical source.
2. Look at the battery and identify the positive and
negative battery posts.
3. Connect the positive lead of the battery charger
to the positive battery post
decal117-0169
1. Positive battery post
2. Negative battery post
4. Connect the negative lead of the battery charger
to the negative-battery post
5. Connect the battery charger to the electrical
source, and charge the battery.
Important:
6. When the battery is fully charged, unplug
the charger from the electrical source, then
disconnect the charger leads from the battery
posts (Figure
61
Keep the battery fully charged. This
Connect the leads of the battery charger
(Figure
Figure 83
3. Red (+) charger lead
4. Black (-) charger lead
(Figure
Do not overcharge the battery.
83).
83).
g003792
83).