Additional Charge Of Lubricant; Charge Of Refrigerant; Check After Installation - mycom i125S Instruction Manual

 Be sure to conduct the initial charge of lubricant in such a way that the oil cooler and oil filter are
filled with lubricant.
 For details about lubricant to be used, refer to section 4.1 "Lubricant (Refrigerant Oil)" in this
manual.
 For the amount of initial charge of lubricant, refer to the instruction manual of the package unit.

3.2.7.2 Additional Charge of Lubricant

For additional charge of lubricant during operation, follow the procedure described in the instruction
manual of each package unit. The applicable procedure differs among units and operating conditions.
3.2.8

Charge of Refrigerant

Charge refrigerant, referring to the refrigerating/cold storage package unit instruction manual.
3.2.9

Check after Installation

Check the compressor after installation according to the check items of the refrigerating/cold storage
package unit
Screw Compressor i-series
3-5
2200M4JE-HO-iS2-N_2014.04.
Chapter 3 Installation
3.2 Installation Works