Don'ts; Warnings; Types And Meanings Of Warnings - mycom i125S Instruction Manual

1.1.2

DON'Ts


Do not remove or relocate any safety device, including electrical interfaces.

Do not disable any safety device by short-circuiting or bypassing without any permission.

Do not leave this product unsafe and unattended, by removing a safety cover or some other
measures.

Do not touch, clean or lubricate any part of this product which is moving.

Do not touch relays or electric systems such as terminal block with bare hands when turning
on the power.
1.2

Warnings

The following two measures are taken for this product to let workers pay attention to possible dangers.

Warnings described in this manual

Safety labels affixed on the equipment main body
* No safety labels are affixed to the compressor itself which this manual is intended for.
For details about the warning labels affixed to the package unit, refer to the instruction
manual of the unit.
1.2.1 Warning Notices in this Manual
The warning messages described in this manual warn dangerous situations that may arise during work
by using the following four categories.
Neglecting such warnings may cause accidents, resulting in personal injury or even death.
Also, this product or its auxiliary equipment may be heavily damaged. Therefore, be sure to always
observe the instructions of the warnings.
Type
Indicates that there is a high risk of death or severe injury if it is not avoided.
Indicates that there is a potential risk of death or severe injury if it is not avoided.
Indicates that there is a risk of light or medium injury if it is not avoided.
Indicates that there is a potential risk of property damage if it is not avoided.
Screw Compressor i-series
Table 1-1 Types and Meanings of Warnings
1-3
2200M4JE-HO-iS2-N_2014.04.
Meaning
Chapter 1 Safety
1.2 Warnings