Advertisement
FlexiShield ® Food Shields Installation
1. Set food shield on base unit. See Figure 1.
2. Mark hole locations.
•
For counter top mounting mark the flange holes. See Figure 2.
•
For under counter mounting mark the leg locations.
3. Drill holes in base unit.
•
For counter top mounting drill 5/32" holes.
•
For under counter mounting drill 3/8" holes.
4. Install with screws provided.
•
For counter top mounting install with screws through the flanges.
•
For under counter mounting install with 1/4"-20 bolts and washers
from beneath the counter. See Figure 3.
5. Make any necessary electrical connections.
6. If applicable test lights, heat lamps etc.
7. Adjust glass for proper alignment and ensure that all hardware is
tightened securely.
8. Clean food shield and glass with mild soap and water.
FlexiShield® food shields are to be used as food and counter protection
only and should not be used in any other way.
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
FlexiShield® Food Shields Installation & Care Manual
Figure 1. By placing the food
shield on the base unit, hole
locations can be marked.
Figure 2. Flange dimensions
Figure 3. Bolt and washer beneath
counter.
PDF created with pdfFactory trial version
www.pdffactory.com
7
Advertisement
