How To Operate The Option Caddy (2) - Toro MH-400 Operator's Manual

How to Operate the Option Caddy (2)

Figure 26: Option Caddy
The option caddy is designed for one person to lift,
transport, and mount the Twin Spinner, swivel kit, or
cross conveyor onto the MH-400 (Figure 26).
: The option caddy's
W
ARNING
maximum carrying load is 227 kg
(500 lb). Do not carry people on it.
8. Position the caddy against the rear of the option.
9. To carry the cross conveyor on the caddy, place the
cross conveyor storage stands about 2 m (6 ft) apart
(Figure 23).
Figure 27: Cross conveyor on storage stands
Operating Instructions
10. Position the fork height and roll the caddy forward
until the forks are completely through the option
(Figure 28).
Figure 28: Cross conveyor on option caddy
11. Crank the handle clockwise to lift the option off the
storage stands.
12. Transport the option to the rear of the MH-400 and
raise it into position for mounting.
: Do not leave loads
C
AUTION
unattended or in the raised position.
13. Install the option into the quick-attach brackets on
the rear of the MH-400 (see How to Mount the
Options on page 16).
14. Lower the forks down slightly and roll the caddy
back until the forks are completely free from the
option.
Note – Do not maneuver the caddy in muddy or soft
terrain, otherwise it will be difficult to move.
When not in use, you can store the cross conveyor and
swivel kit on the cross conveyor storage stands (Figure
29).
Page 35