Related Manuals for Toro Top Dresser 1800
Summary of Contents for Toro Top Dresser 1800
- Page 1 Form No. 3327–686 Top Dresser 1800 For Workman 3000/4000 Series Model No. 44225–220000301 and Up Operator’s Manual English (EN)
-
Page 2: Table Of Contents
Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. Figure 1 illustrates the location of the model and serial numbers on the product. -
Page 3: Safety
Perform only those maintenance instructions described in this manual. If major repairs are ever needed or Operator and passenger should remain seated whenever the vehicle is in motion. assistance is desired, contact an Authorized TORO Distributor. - Page 4 To ensure optimum performance and safety, always purchase genuine TORO replacement parts and accessories to keep the Toro all TORO. NEVER USE “WILL–FIT” REPLACEMENT PARTS AND ACCESSORIES MADE BY OTHER MANUFACTURERS.
-
Page 5: Safety And Instruction Decals
Safety and Instruction Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or lost. 93-9867 99-0015 1. Warning—do not carry passengers. 1. Entanglement hazard, conveyor and brush—keep bystanders a safe distance from the machine. -
Page 6: Specifications
Specifications Note: Specifications and design subject to change without notice. General Specifications Hydraulic driven with Workman remote hydraulics. Drive Belt motor with chain reduction Brush motor direct drive Conveyor Belt Continuous 60” wide traction grip PVC belt with heavy duty monofilament carcass. Spring release flexible edge gate variable from closed to 3 opening for light to heavy Metering Gate applications. -
Page 7: Setup
Spacer Mount H.D. Hitch Frame Cylinder Pin Capscrew 1/4-20 x 3/4” lg. Mount lift cylinder to topdresser Lock Nut 1/4-20 Operator’s Manual Read before operating machine Parts Catalog Registration Card Fill out and return to Toro CE Certificate of Compliance... - Page 8 Remove 2/3 Or Full Size Bed CAUTION: The full bed weighs approximately 210 pounds, so do not try to remove it by yourself. Get the help (If So Equipped) of two or three other people. Note: If the Workman is equipped with a H.D. Hitch Frame it does not have to be removed from the vehicle but the Mount Topdresser weight of the hitch frame must be subtracted from the...
- Page 9 Important When removing the topdresser, ALWAYS remove the mounting bolts and pins before lifting. 6. Secure each rear mounting bracket to vehicle frame with a clevis pin and (2) lynch pins (Fig. 7). 1. Hitch frame tab 2. Vehicle frame 3.
- Page 10 Caution When tilting the hopper of the topdresser back to perform maintenance on the Workman. ALWAYS remove the front mounting bolts first. ALWAYS tilt the topdresser with an empty load Safety Support ALWAYS use the safety supports supplied with the Workman to keep the cylinders in the extended position while performing maintenance.
- Page 11 marked “A” and “B”, match them to the quick couplers 1. Start vehicle engine and test rotation of the conveyor when installing. Assure both quick couplers are full and brush. Place remote hydraulics lever of Workman in engaged. the “run” position. The rotation should be as shown in figure 13.
-
Page 12: Controls
Controls Safe operation begins before taking the vehicle out for a day’s work. Read and understand the operating instructions in the Toro Workman operator’s manual before using the topdresser. Gate Metering Control Warning The black knobs on the left rear side of the machine are used to adjust and lock the gate into the desired open height position. - Page 13 Danger Warning As a general rule, position the weight of the Tipping or rolling the vehicle on a hill will load evenly from front to rear and evenly cause serious injury from side to side. If engine stalls or you lose headway on a hill, Transporting or topdressing with a full load never attempt to turn vehicle around.
-
Page 14: Lubrication
Cold Weather Operation Lubrication The Topdresser 1800 may be used in cold weather, with certain limitations, to apply a salt/sand mixture on pavement for ice control. The PVC conveyor belt material Greasing Bearings becomes very stiff in cold weather and requires more power The Topdresser 1800 has 5 grease fittings that must be to operate belt. -
Page 15: Maintenance
Maintenance Note: Determine the left and right sides of the machine from the normal operating position. Warning Before servicing or making adjustments to the machine, stop engine, set parking brake and remove key from ignition switch. Any load material must be removed from hopper before working under raised topdresser. - Page 16 3. Rotate motor and sprocket assembly, in mounting slots, until proper tension is achieved. 35-1/4, 1. Conveyor belt roller shafts Replacing Conveyor Belt When replacing a damaged or worn conveyor belt, always inspect hopper seals (Fig. 23) and gate edge (Fig. 23) for wear or torn edges.
- Page 17 Important Make sure hopper is pivoted beyond center and/or secured to wall or post to prevent it from accidentally falling on work area (Fig. 28). 1. Drive chain 2. Master link 3. Motor Note: Motor mounting bolts may have to be loosened to 6.
- Page 18 8. To remove belt: Trouble Shooting Cut belt and remove from rollers Difficulty in connecting or disconnecting quick couplers: Pressure not relieved (Quick coupler under Insert a plastic belt tool between each roller and pressure). belt. Rotate rollers until each tool is positioned to the outside of each roller.
-
Page 19: Hydraulic Schematic
Hydraulic Schematic BRUSH MOTOR CONVEYOR MOTOR 2.8 IN /REV 29.8 IN /REV Seasonal Storage 4. Check the tension of the drive chain. Adjust the tension, if necessary. Thoroughly clean the topdresser, especially inside the 5. Check the tension of the conveyor belt. Adjust the hopper. -
Page 20: The Toro General Commercial Products Warranty
If for any reason you are dissatisfied with your Distributor’s service or have difficulty obtaining guarantee information, contact the Toro importer. If all other remedies fail, you may contact us at Toro Warranty Company.