Toro Top Dresser 1800 Operator's Manual page 9

1
2
1. Hitch frame tab
2. Vehicle frame
3. Attachment bracket
4. Secure a spacer mount to top of each hitch frame tab
with the capscrew, (2) flatwashers and locknut
previously removed (Fig. 6).
1. Spacer mount
5. Position Topdresser onto vehicle frame, aligning holes
in rear mounting brackets with holes in each side of
frame (Fig. 7).
Note: If using the optional Lift Assembly Kit (92-4452) to
lift the topdresser, proceed as follows:
Place the lift bracket on top of hopper.
Important
remove the mounting bolts and pins before lifting.
6. Secure each rear mounting bracket to vehicle frame
with a clevis pin and (2) lynch pins (Fig. 7).
3
1. Vehicle frame channel
2. Mounting brackets
7. Loosely secure top of each attachment bracket (Fig. 8)
or spacer mount (Fig. 9) to mounting tab on each side of
topdresser with a 1/2–13 x 1" lg. capscrew, (2)
flatwashers and locknuts. Tighten all fasteners.
9
When removing the topdresser, ALWAYS
2
3
4
1
1
1. Topdresser mounting tab
2. Attachment bracket
4
3. Clevis pin
4. Lynch pin
2