Hydraulic Schematic
BRUSH MOTOR
2.8 IN /REV
Seasonal Storage
Thoroughly clean the topdresser, especially inside the
hopper. The hopper and conveyor belt area should be free
of any remaining sand particles.
1. Tighten all fasteners.
2. Lubricate all grease fittings and bearings. Wipe off
excess lubricant.
3. The unit should be stored out of the sun to prolong the
life of the conveyor belt. When stored outside it is
recommended to cover the hopper with a tarp.
3
M
19
CONVEYOR MOTOR
3
29.8 IN /REV
M
4. Check the tension of the drive chain. Adjust the tension,
if necessary.
5. Check the tension of the conveyor belt. Adjust the
tension, if necessary.
6. When bringing topdresser out of storage, check for
smooth operation of belt before adding material in
hopper.