Intended Use; Technical Data; Parts Of The Machine - Festool ISC 240 Li Instructions Manual

240 mm
Main handle
a = 2.5 m/s
h
Auxiliary
a = 4 m/s
h
handle
Uncertainty
K = 2 m/s
240 mm
Main handle
a = 4.5 m/s
h
Auxiliary
a = 7.5 m/s
h
handle
Uncertainty
K = 2 m/s
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3

Intended use

The cordless insulating-material saw is de­
signed to saw flexible insulating materials
made of mineral wool (glass or stone wool) or
natural fibres (e.g. wood or hemp fibres) as well
as to saw insulating materials made of PUR/PIR
(polyurethane hard foam), polystyrene or pres­
sure-resistant mineral wool.
In accordance with the intended use, only insu­
lating materials with the following raw densi­
ties may be machined:
Flexible natural fibres
Flexible mineral wool
Pressure-resistant mineral
wool
Flexible mineral wool
350 mm
a = 2.5 m/s
2
h
a = 4.5 m/s
2
h
K = 2 m/s
2
PUR
350 mm
a = 8.5 m/s
2
h
a = 14 m/s
2
h
K = 5 m/s
2
< 90 kg/m³
< 100 kg/m³
100–170 kg/m³
PUR/PIR
Polystyrene
The cordless insulating-material saw is not
2
suitable for sawing chipboard, metal, wood or
2
pressure-resistant insulating materials made
of natural fibres.
This power tool may only be used by experts or
2
instructed persons.
Only saw insulating materials with the cutting
set intended for this purpose, see section
The user is liable for damage and acci­
2
dents caused by improper and non-inten­
2 ded use.
– intended for use with BP Festool battery
packs of the same voltage class.
2
4

Technical data

ISC 240 Li cordless insulating-material saw
Motor voltage
Stroke rate
Stroke length
Max. cutting depth
Weight without battery pack
Weight as per EPTA procedure
01:2014:
5

Parts of the machine

[1-1] Auxiliary handle
[1-2] Main handle
[1-3] Lint filter
[1-4] Buttons for releasing the battery pack
[1-5] On/off switch
[1-6] Rotary knob for changing the cutting
set
[1-7] Cutting set
[1-8] Protective cover
[1-9] Extractor connector
Accessories shown or described are not always
included in the scope of delivery.
The specified illustrations appear at the begin­
ning of the Operating Instructions.
< 36 kg/m³
< 45 kg/m³
14.4–18 V
3000 rpm
Cutting set, short 240 mm
Cutting set, long 350 mm
English
6.2 .
26 mm
1.8 kg
2.5 kg
23