Table of Contents
Advertisement
Introduction
This machine is a ride-on, reel-blade lawn mower intended
to be used by professional, hired operators in commercial
applications. It is primarily designed for cutting grass
on parks, sports fields, caravan parks, cemeteries, and
commercial grounds. It is not designed for cutting brush or
for agricultural use.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly for product and accessory
information, help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready. The model and serial numbers are on
the left side of the frame. Write the numbers in the space
provided.
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety-alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
Contents
Safety ........................................................................... 3
General Safety......................................................... 3
Safe Operating Practices........................................... 3
Toro Riding Mower Safety ........................................ 6
Safety and Instructional Decals ................................. 8
Setup ...........................................................................12
© 2016-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
(Figure
Figure 1
Product Overview .........................................................12
Controls ...............................................................13
Specifications ........................................................19
Attachments/Accessories........................................19
Operation ....................................................................19
Checking the Engine-Oil Level.................................19
Checking the Cooling System ...................................20
Adding Fuel...........................................................21
Checking the Hydraulic Fluid ..................................22
Checking the Tire Pressure ......................................23
Checking the Torque of the Wheel Nuts.....................23
Think Safety First ...................................................23
Mechanism ........................................................23
Controls ............................................................24
Starting and Shutting Off the Engine.........................24
Correction .........................................................26
Units.................................................................26
Lift ...................................................................26
Engaging the Cutting Unit Drive ..............................26
Clearing the Cutting Units .......................................27
Using Weight Transfer/Traction Assistance................27
Folding the ROPS ..................................................27
Locating the Jacking Points ......................................28
Transporting Machines............................................29
Operating Tips ......................................................29
Maintenance .................................................................31
Recommended Maintenance Schedule(s) ......................31
Daily Maintenance Checklist ....................................32
Preparing the Machine for Maintenance.....................33
1),
Service Interval Chart .............................................33
Lubrication ...............................................................34
Greasing the Bearings, Bushings, and Pivots ...............34
Engine Maintenance ..................................................35
System ..............................................................35
g000502
Servicing the Air Cleaner .........................................35
Servicing the Engine Oil and Filter............................36
Fuel System Maintenance ...........................................37
Draining the Fuel Tank ...........................................37
Checking the Fuel Lines and Connections ..................37
Bleeding the Fuel System .........................................37
Replacing the Fuel Filter..........................................37
Electrical System Maintenance ....................................38
Checking the Electrical System .................................38
Checking the Battery Condition................................38
Servicing the Battery...............................................39
Drive System Maintenance .........................................39
Changing the Transmission Oil Filter ........................39
Changing the Hydraulic Return Filter ........................39
Checking the Rear Wheel Alignment .........................40
Operating Mechanism .........................................40
Cooling System Maintenance ......................................41
2
Contact us at www.Toro.com.
Printed in the UK
All Rights Reserved
Advertisement
Table of Contents
