Equipment Troubleshooting; Entire Grill (All Models) - Taylor C850 Manual

Entire Grill (All Models)

Problem
The exhaust hood alone does not turn
on when the fan interlock switch is in the
ON position.
The grill alone will not turn on when the
fan interlock switch is in the ON position.
The platen will not stay down when the
STANDBY button is pressed.
The grill displays TOO COOL.
The grill displays TOO HOT.
Thermocouple X is open.
Thermocouple X is shorted.
The grill is making loud whistling noise
when cooking product with egg ring.

EQUIPMENT TROUBLESHOOTING

Probable Cause
The fan interlock switch is faulty.
Loose or broken wires to switch.
The grill breaker has tripped.
The grill's control voltage cord has
become unplugged.
The Ansul reset tripped.
Internal component failure.
The cavity where the handle latches to
the latch solenoid (located at the front of
the grill) is dirty.
Internal component failure.
The grill is not within the specified
temperature range of the specified
recipe.
Three-phase breaker tripped.
Three-phase cord has become
unplugged from the wall.
The grill is not within the specified
temperature range of the specified
recipe.
Internal component failure.
Three-phase cord has become
unplugged from the wall.
Internal component failure.
The egg ring is dirty and causing steam
to escape.
74
Remedy
Call for service.
Call for service.
Reset the breaker.
Reseat the power cord.
Press the Ansul reset button.
If the problem still remains, call for
service.
Clean the handle foot and/or the latch
solenoid post.
If the problem still remains, call for
service.
Wait for the grill to reach temperature
range for specified recipe.
Reset the breaker.
Reseat the three-phase plug.
Wait for the grill to reach temperature
range for specified recipe.
Call for service.
Reseat the three-phase plug.
If the problem still remains, call for
service.
Clean the egg ring.