Storage And Transportation - Pattfield Ergo Tools k600-1 BS Original Instructions Manual

6 Spare parts/Replacement parts
The following parts of this product may be
replaced by the consumer. Spare parts are
available at an authorized dealer or through
our customer service.
Description
Clutch handle with
handle bracket
Tyre
Roller brush
X-Storage and transportation
1 Storage
a). Clean the product as described above.
b). Loosen the knobs and fold the upper
handle bar, if required (Fig. 31).
c). Store the product and its accessories in
a dry, frost-free place.
d). Always store the product in a place that
is inaccessible to children. The ideal
storage temperature is between 10 and
30°C.
e). We recommend using the original
package for storage or covering
the product with a suitable cloth or
enclosure to protect it against dust.
f). Empty the tank if you are not going to
use the product for an extended period
of time (more than 3 months) and
before storing it for the winter.
2 Transportation
a). Switch the product off and disconnect
the spark plug connector before
transporting it anywhere.
b). Attach transportation guards, if
applicable.
c). Always transport the product by its
handle.
d). Protect the product from any heavy
impact or strong vibrations which may
occur during transportation in vehicles.
MNL_DFT_k600-1 BS_V02_130708.indb 237
Model no. or
Specification
e). Secure the product to prevent it from
slipping or falling over, loss of fuel,
damage and injury.
GB
237
7/8/13 5:04 PM