Pattfield Ergo Tools k600-1 BS Original Instructions Manual page 225

e). Maintain this product in accordance
with these instructions and keep it well
lubricated (where appropriate).
f). Plan your work schedule to spread any
high vibration tool use across a longer
period of time.
g). Prolonged exposure to noise levels
above 80dB(A) is a hazardous to
hearing. Always wear ear protection
when operation or working around the
product.
h). Running at low speed can reduce noise
and vibration.
i). In order to lower the noise, the product
should be operated in an open
environment.
j). The vibration can be lowered if the
handle is grasped firmly.
k). In order to lower the vibrations, use the
product on as flat as possible surfaces.
l). In order not to disturb others, the
product should only be used in daytime.
m). Always wear protective clothes when
working with the product such as gloves
and ear protection during operation.
n). Rest 30 minutes after every two hours
of working time.
6 Emergency
Familiarise yourself with the use of this
product by means of this instruction
manual. Memorise the safety directions
and follow them to the letter. This will
help to prevent risks and hazards.
a). Always be alert when using this
product, so that you can recognise
and handle risks early. Fast
intervention can prevent serious injury
and damage to property.
b). Stop the engine and disconnect
the spark plug connector if there
are malfunctions. Have the product
checked by a qualified professional
and repaired, if necessary, before you
operate it again.
MNL_DFT_k600-1 BS_V02_130708.indb 225
c). In case of fire stop the engine and
disconnect the spark plug connector.
Take fire-extinguishing measures
immediately if the product switch is no
longer accessible.
WARNING! Never use water
to extinguish a product on
fire. Burning fuel must be
extinguished with special
extinguishing agents! We
recommend that you keep a
suitable fire extinguisher within
reach in your work area!
7 Residual risks
Even if you are operating this product
in accordance with all the safety
requirements, potential risks of injury
and damage remain. The following
dangers can arise in connection with the
structure and design of this product:
a). Health defects resulting from vibration
emission if the product is being used
over long periods of time or not
adequately managed and properly
maintained.
b). Injuries and damage to property due to
broken application tools or the sudden
impact of hidden objects during use.
c). Danger of injury and property damage
caused by flying objects.
d). Burns, if touching hot surfaces.
WARNING! This product
produces an electromagnetic
field during operation! This field
may under some circumstances
interfere with active or passive
medical implants! To reduce
the risk of serious or fatal injury,
we recommend persons with
medical implants to consult their
doctor and the medical implant
manufacturer before operating
this product!
GB GB
225
7/8/13 5:04 PM