Vox Mode - Philips Avent SCD843 Manual

16
English
1
AUDIO 20°C
VOX
1
VOX VOX VOX VOX 20°C
1
VOX 20°C
Note: The link light shows that the parent unit is still on and connected to
the baby unit.
Note: When sensitivity level is not set to 'very high', low sounds will be
muted.
Note: Set the sensitivity level to 'very high' to have continuous sound
on the parent unit. Please see the Sensitivity level chapter for more
information.
All sounds are constantly transmitted to the parent unit. If your baby
cries, the display of the parent unit is still off, but the sound level lights
light up green and the sounds detected by the baby unit are transmitted
to the parent unit. As long as no sound is detected, the sound level lights
are off.

VOX mode

1 Press the mode button on the side of the parent unit to switch to VOX
mode.
Note: When the display is on, the selected mode is shown in the status
bar. The status bar is not visible when the display is off.
When the VOX mode is activated, the display and sound of the parent
unit switch off, if there is no sound detected for 20 seconds.
When sound is picked up by the baby unit, the display and sound of the
parent unit switch on immediately. The sounds are transmitted to the
parent unit and the sound level lights light up green. As long as no sound
is detected, the sound level lights are off.
Note: The minimum sound level to activate sound and display is defined
by the sensitivity setting.