Philips Avent SCD843 Manual page 10

10
English
1
Eco 20°C
1
Eco 20°C
1
Eco 20°C
4 Press the on/off button on the parent unit to switch on the parent unit.
-
The display goes on, the linking image appears on the display and the
link light lights up red. The parent unit starts to search for the baby
unit.
-
When the parent unit and baby unit are linked, the link light lights up
green on the parent unit and one or more bars appear on the display.
Note: It takes less than 10 seconds to establish the link between the
parent unit and the baby unit.
-
When the baby unit is turned off, the parent unit will show the out of
range image. Make sure that the baby unit is switched on.
-
If no connection has been established, the link light turns red, the
parent unit beeps three short beeps every 20 seconds and the out-of-
range image appears on the display.