Sensitivity 10; Eco Max Mode 10 - Philips AVENT SCD713 User Manual

Sensitivity
Icon
Eco Max mode
This option in the parent unit menu allows you to set the microphone
sensitivity of the baby unit
The microphone sensitivity determines what noise level the baby unit
picks up, eg you will want to hear when your baby cries, but you may be
less interested in its babbling
1 Select 'Sensitivity' in the menu with the + and - buttons and press OK
to confirm.
2 Use the + and - buttons to increase or decrease the microphone
sensitivity. The number of filled segments shows the sensitivity level
selected. Press OK to confirm the setting.
Sensitivity levels and indications
Sensitivity
highest
high
medium
low
Smart Eco is a standard feature on this baby monitor It automatically
reduces the DECT signal from the baby unit to save energy To save even
more energy, activate the Eco Max mode In this mode, the DECT signal of
the baby unit is switched off as long as the baby does not make a sound.
Caution: In Eco Max mode, the parent unit receives feedback
from the baby unit with a delay. When your baby makes a
sound, the baby unit first has to reactivate radio transmission
before it can send feedback to the parent unit.
Please note the following:
- In Eco Max mode you do not receive feedback when the parent unit is
out of range of the baby unit You can check the link by pressing any
button on the parent unit
- The Eco Max mode cannot be activated if the microphone sensitivity is
set to the highest level
Description
Hear everything from your baby The
speaker of the parent unit is continuously
on
Hear all sounds from soft babbling and
louder If your baby does not make any
sound, the speaker of the parent unit is off.
Hear sounds from soft cries and louder
If your baby makes softer sounds, the
speaker of the parent unit does not go on
The speaker of the parent unit only goes
on if the baby makes loud sounds, for
instance because it is crying
- 10 -