Copying Multiple Originals Onto A Single; Sheet Of Paper (2 In 1 / 4 In 1 Copy); Document Glass - Sharp MX-M200D Operation Manual

COPYING MULTIPLE ORIGINALS ONTO A
SINGLE SHEET OF PAPER
Multiple originals can be copied onto a single sheet of paper in a selected layout.
This function is convenient when you wish to present multiple pages in a compact format, or show a view of all
pages in a document.
One of two layouts can be selected for 2 in 1 copy, and one of four layouts can be selected for 4 in 1 copy.
Border line selections are solid line, broken line, or none.
2 in 1 copy
Pattern 1
2 in 1 copy layouts
• 2 in 1 / 4 in 1 copy cannot be used in combination with the following functions. The function selected first will take
precedence. However, 2 in 1 / 4 in 1 copy will take precedence over XY zoom.
Dual page copy, XY zoom, edge erase, margin shift, card shot
• A special paper size cannot be used for 2 in 1 / 4 in 1 copy.
• 2 in 1 / 4 in 1 copy cannot be selected for an interrupt copy job. Interrupt copying is not possible during a 2 in 1 / 4
in 1 copy job.
• An appropriate ratio setting will be automatically selected based on the original size, the paper size, and the
selected number of images. When using the document glass, reduction is possible to 25%. When using the SPF,
reduction is possible to 50%. Certain combinations of original size, paper size, and number of images may result in
images being cut off.
• Even if "Rotation copy" is disabled in the system settings, the images may be rotated if needed depending on the
orientation of the originals and the orientation of the paper.
1
Place the originals in the document
feeder tray or the first original on the

document glass.

2
Press the [PAPER SELECT] key to
select the desired paper tray.
The bypass tray cannot be
EXPOSURE PAPER SELECT COPY RATIO AUTO
selected.
COLOUR MODE RESOLUTION ADDRESS FO
PROGRAM RESOLUTION ADDRESS BRO
66
Pattern 2
(2 in 1 / 4 in 1 copy)
4 in 1 copy
Pattern 1 Pattern 2
4 in 1 copy layouts
3
Press the [SPECIAL FUNCTION] key.
ON LINE
DATA
SPECIAL
FUNCTION
LINE
COPY EXPOSURE PAPER SE
DATA
SCAN COLOUR MODE RESOLUT
The special function
screen will appear.
4
Press the [OK] key.
GHI
BACK
OK
PQRS
PY
AN
The special modes
screen will appear.
Pattern 3 Pattern 4
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
SPECIAL MODES
MARGIN SHIFT
ERASE
DUAL PAGE COPY
[OK]:ADJUST