Sharp MX-M200D Operation Manual page 34

TROUBLESHOOTING AND MAINTENANCE
Misfeed in B
1
Open the front cover.
Push gently on both ends of the
front cover.
2
Turn the roller rotating knob in the
direction of the arrow.
Roller
rotating knob
3
Lower the right and left fusing unit
release levers and remove the misfed
paper.
Be careful not to tear the misfed
Fusing unit release levers
paper during removal.
The fusing unit is hot. Do not touch
Warning
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
• Do not touch the photoconductive drum
Caution
(green portion) when removing the misfed
paper. Doing so may damage the drum
and cause smudges on copies.
• Take care not to allow unfixed toner on the
misfed paper to soil your hands or clothes.
32
4
Lift the fusing unit release levers.
5
Close the front cover and the side
cover.
The message "
path." will be cleared and
copying will be possible.
• When closing the front cover, gently hold
Note
both ends.
• When closing the side cover, hold the
handle.
• If the message does not clear, check
again to make sure that no pieces of
paper remain.
Clear paper