Peripheral Devices And Supplies; Optional Equipment - Sharp MX-M200D Operation Manual

3
PERIPHERAL DEVICES AND
SUPPLIES
Optional equipment and supplies are explained in this chapter. To purchase optional equipment and supplies,
contact your authorised service representative.

OPTIONAL EQUIPMENT

Convenient optional equipment can be installed on the machine as needed.
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
Note
changes for product improvement without prior notice.
• Peripheral devices are normally optional, but are incorporated in some models as standard equipment.
Reversing single pass feeder (AR-RP10)
Single pass feeder (AR-SP10)
Document cover (AR-VR7)
250-sheet paper feed unit (AR-D34)
2 x 250-sheet paper feed unit (AR-D35)
Job separator tray kit (MX-TR10)
256MB expansion memory board (AR-SM5)
Facsimile expansion kit (MX-FX10)
8MB fax memory (AR-MM9)
Network expansion kit (MX-NB10)
PS3 expansion kit (MX-PK10)
Barcode font kit (AR-PF1)
Flash memory kit (AR-PF2)
Yes: Can be installed.
*1 The network expansion kit (MX-NB10) must be installed.
*2 The facsimile expansion kit (MX-FX10) must be installed.
40
No: Cannot be installed.
MX-M160D
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2
Yes*
Yes
1
Yes*
1
Yes*
1
Yes*
MX-M200D
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2
Yes*
Yes
1
Yes*
1
Yes*
1
Yes*