Administrator Password Number: Factory Setting - Sharp MX-M200D Operation Manual

ADMINISTRATOR PASSWORD
NUMBER: FACTORY SETTING
The following is the factory setting of the Administrator Password Number, which must be used to access the
System Settings.
Factory setting = 00000
This number must be entered when accessing the System Settings for the first time. (Page 76)
• The Administrator Password Number is an important security number allowing the Administrator to
Note
configure the copier's functions and auditor's settings.
• You should register your own code number – different from the factory setting above – immediately after
your copier is installed.
• Detach this page and store it in a safe place.
101