Table of Contents
Advertisement
Nexus Configuration Guide
4.4
LAN Settings
The LAN Settings page can be used to set the hostname, default gateway, and IP address for
the camera. In FSM, the Hostname will appear as the name of the sensor. The default IP
Address mode is static; the mode can also be set to DHCP .
When the LAN settings are changed and the Save button is clicked, a pop-up message will
appear to indicate the network interface will be restarted.
Note
Once the IP address of the camera is changed, the PC may no longer be on the same network
and therefore may not be able to access the camera until the IP address on the PC is changed
also. For that reason, you may wish to change the IP address after making other configuration
changes.
Note
If the Hostname is changed, the new name may not show up in FSM until the camera is
rebooted. To reboot the camera, save any configuration changes, then select Server Status
and click the Reboot button.
427-0030-00-28, version 100
January 2012
4—Nexus Camera Configuration
4-3
Advertisement
Table of Contents
