Teldat Regesta Smart PRO Installation Manual page 16

Teldat S.A.
F
G
H
I
Regesta Smart PRO
For more information about the LAN interface, refer to:
- LAN connection on page 21
- LAN Connector on page 34
- LAN Interface on page 37
POWER. Power connection.
Depending on the model, the Regesta Smart PRO can be AC or DC powered.
For more information about the power connection options, refer to:
- Power Source on page 19.
- Power Supply Specifications
4xPort Gigabit Ethernet Switch. (Depending on the model)
For more information about the LAN interface, refer to:
- 4-port Ethernet Switch connections
- LAN Switch Connector on page 35
- Switch Interface on page 37
DCE RS-232 serial ports or RS-485 2-4 wires/RS-422.
The type of configuration of each port depends on the hardware configuration of the device
(model).
For more information on the connector for serial ports, RS-485 2-4 wires/RS-422 and DCE
RS-232, refer to:
RS232 option:
- RS-232 Serial Port on page 26
- RS-232 Serial Port Connectors
- RS-232 Serial Interface on page 38
RS485 option
- RS-485/RS-422 Serial Port
- RS-485 Serial Port Connectors
- RS-485 Serial Interface on page 38
RF/WWAN antenna connectors for the Celluar interface, based on the model.
For more information about the Cellular interface, refer to:
- WWAN Antenna connections (RF connectors)
- WWAN/RF Connectors on page 35
- Wireless WAN interface on page 38
Refer to Installing the SIM card
the Cellular interface.
on page 39
on page 22
on page 36
on page 26
on page 36
on page 23
on page 26 for more information about SIM installation for
2 Product Overview
11