Service And Spare Parts; Reference Documents; Specifications; Approvals - Hubbell GAI-Tronics HUBBCOM GSC1100 Quick Start Manual

™
HUBBCOM GSC1100/GSC2100 Dual-Port DT/WM Smart Controllers
17. Use the GUDA to complete the configuration of the HUBBCOM smart controller.
N : Enter additional station parameters while activating the smart controller to save time. The
OTE
smart controller accepts and sets all entered parameters regardless of correct activation code
entry. Changing the network parameters of a HUBBCOM smart controller prevents the PC
from connecting to the smart controller until the PC's IP address is on the same subnet as
that smart controller.
18. Connect additional HUBBCOM smart controllers to the network and repeat the procedure to activate
them.

Service and Spare Parts

Contact a regional service center for assistance if the equipment requires service or spare parts. A return
authorization number (RA#) will be issued if service is required. Ship equipment prepaid to GAI-Tronics
with an RA# and a purchase order number. Repair or a replacement is made in accordance with GAI-
Tronics' warranty policy if the equipment is under warranty. Please include a written explanation of all
defects to assist our technicians in their troubleshooting efforts. Call 800-492-1212 inside the USA or
610-777-1374 outside the USA for help with identifying the Regional Service Center closest to you.

Reference Documents

GAI-Tronics Universal Device Application .................................................................................. 42004-531
HUBBCOM Device Configuration Guide ..................................................................................... 42004-551

Specifications

Wi-Fi operating frequency range ........................................................................................ 2.412–2.462 GHz
Temperature Range ............................................................................................. 32 °F–122 °F (0 °C–50 °C)

Approvals

Compliance to Standard
CE
EMC emissions to Class B ....................................................................... EN55032/FCC Part15B/ICES-003
Immunity .......................................................................................................................................... EN55035
Assessment risk of exposure ............................................................................................................ EN62311
Product Safety Assessment .................................................................................................. UL/IEC62368-1
Contains FCC ID: Z64-WL18DBMOD and IC: 4511-WL18DBMOD
N : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
OTE
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-532E.docx
11/20
Pub. 42004-532E
Page 10 of 10