Service And Spare Parts - Hubbell GAI-Tronics HUBBCOM GSC3100 Quick Start Manual

HUBBCOM™ GSC3100/GSC4100 Dual-Port Flush-Mount Smart Controllers
5. Select the PC's APIPA assigned network interface from the S
dropdown list.
6. Click the F D
IND EVICES
An ICON for the new HUBBCOM smart controller appears when the PC can connect to it.
7. Click on the ICON for the HUBBCOM smart controller.
8. Click the C
ONNECT AND
9. Login:
•
Username: gai-tronics
•
Password: pageparty
10. Create a new username and password.
11. Login to the HUBBCOM smart controller with the new username and password.
12. Scroll down in the left pane and click on A
13. Enter the smart controller's activation code on the activation screen.
14. Click the A
button to confirm the activation code.
PPLY
A R button appears next to the A
EBOOT
15. Click R
and confirm it.
EBOOT
The smart controller will reboot and will display the HUBBCOM splash screen again.
16. Verify the smart controller activates and the model number is correct
1. Click the Menu button.
2. Click the Settings button.
•
The model is shown on the left side above the volume controls.
•
The model will show NOT SPECIFIED if the smart controller is not activated.
17. Use the GUDA to complete the configuration of the HUBBCOM smart controller.
N : Enter additional station parameters while activating the smart controller to save time. The
OTE
smart controller accepts and sets all entered parameters regardless of correct activation code
entry. Changing the network parameters of a HUBBCOM smart controller prevents the PC
from connecting to the smart controller until the PC's IP address is on the same subnet as
that smart controller.
18. Connect additional HUBBCOM smart controllers to the network and repeat the procedure to activate
and configure them.

Service and Spare Parts

Contact a regional service center for assistance if the equipment requires service or spare parts. A return
authorization number (RA#) will be issued if service is required. Ship equipment prepaid to GAI-Tronics
with an RA# and a purchase order number. Repair or a replacement is made in accordance with GAI-
Tronics' warranty policy if the equipment is under warranty. Please include a written explanation of all
defects to assist our technicians in their troubleshooting efforts. Call 800-492-1212 inside the USA or
610-777-1374 outside the USA for help with identifying the Regional Service Center closest to you.
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-533F.docx
11/20
button to perform a device discovery in the GUDA.
C
button for the HUBBCOM smart controller.
ONFIGURE
CTIVATION
button.
PPLY
N
ELECT ETWORK
.
Pub. 42004-533F
Page 9 of 10
I
NTERFACE