Hubbell GAI-Tronics HUBBCOM GSC3100 Quick Start Manual

Hubbell GAI-Tronics HUBBCOM GSC3100 Quick Start Manual

Dual-port flush-mount smart controllers

Advertisement

Quick Links

HUBBCOM™ GSC3100/GSC4100
Dual-Port Flush-Mount Smart Controllers
Confidentiality Notice .....................................................................................................................1
General Information .......................................................................................................................1
Important Safety Instructions .........................................................................................................1
Security Hardware ..........................................................................................................................3
Installation ......................................................................................................................................3
Flush-Mount Installations ...................................................................................................................... 3
Surface Mount Installations ................................................................................................................... 4
Wiring ...................................................................................................................................................... 5
RTU Input/Output ................................................................................................................................. 5
RS-485 and External Speaker Connections .......................................................................................... 6
Ethernet ................................................................................................................................................. 6
24 V DC Power ..................................................................................................................................... 7
Antenna ................................................................................................................................................. 7
Activation .........................................................................................................................................7
Activation with DHCP ............................................................................................................................ 7
Activation without DHCP ...................................................................................................................... 8
Service and Spare Parts ..................................................................................................................9
Reference Documents ...................................................................................................................10
Specifications ................................................................................................................................10
Approvals .......................................................................................................................................10
GAI-TRONICS 3030 KUTZTOWN RD. READING, PA 19605 USA
610-777-1374 ◼ 800-492-1212 ◼ Fax: 610-796-5954
V
ISIT WWW
G A I - T R O N I C S
A H U B B E L L C O M P A N Y
T
C
A B L E O F
.
-
.
GAI
TRONICS
COM FOR PRODUCT LITERATURE AND MANUALS
®
O N T E N T S
Pub. 42004-533F

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GAI-Tronics HUBBCOM GSC3100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hubbell GAI-Tronics HUBBCOM GSC3100

  • Page 1: Table Of Contents

    Pub. 42004-533F G A I - T R O N I C S ® A H U B B E L L C O M P A N Y HUBBCOM™ GSC3100/GSC4100 Dual-Port Flush-Mount Smart Controllers A B L E O F O N T E N T S Confidentiality Notice ........................1 General Information ........................1...
  • Page 2: Confidentiality Notice

    Pub. 42004-533F G A I - T R O N I C S ® A H U B B E L L C O M P A N Y HUBBCOM™ GSC3100/GSC4100 Dual-Port Flush-Mount Smart Controllers Confidentiality Notice This manual is provided solely as an installation, operation, and maintenance guide and contains sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
  • Page 3 Pub. 42004-533F HUBBCOM™ GSC3100/GSC4100 Dual-Port Flush-Mount Smart Controllers Page 2 of 10 These enclosures must be installed by trained, qualified and competent personnel. Installation must comply with state and national regulations, as well as safety practices for this type of equipment. WARNING —Use only 24 V dc power supplies that conform to UL/CSA/CE Class II, Double Insulated supplies with over voltage and short circuit protection.
  • Page 4: Security Hardware

    Pub. 42004-533F HUBBCOM™ GSC3100/GSC4100 Dual-Port Flush-Mount Smart Controllers Page 3 of 10 Security Hardware The HUBBCOM smart controllers described in this manual are vandal resistant. Security screws attach the front panel of each smart controller to its enclosure. Use a GAI-Tronics Model 233-001 security screwdriver or Torx T-25 security head tip (sold separately) to install the telephone.
  • Page 5: Surface Mount Installations

    Pub. 42004-533F HUBBCOM™ GSC3100/GSC4100 Dual-Port Flush-Mount Smart Controllers Page 4 of 10 Surface Mount Installations Use a GAI-Tronics Model 236 Series or Model 238-001 Enclosure to surface mount the HUBBCOM smart controller: 1. Refer to Pub. 42004-285 for the Model 236 Series or Pub. 42004-434 for the Model 238-001 backboxes to install the surface-mount enclosure (see the Reference Documents section).
  • Page 6: Wiring

    Pub. 42004-533F HUBBCOM™ GSC3100/GSC4100 Dual-Port Flush-Mount Smart Controllers Page 5 of 10 Figure 3. Flush-Mount Cutout Details Wiring HUBBCOM smart controllers have quick release terminal blocks that accept 18–24 AWG wires. Release wires from the terminal block by pressing the quick release button above the terminal. : Two clamp on ferrite cores are supplied with the smart controller.
  • Page 7: Rs-485 And External Speaker Connections

    Pub. 42004-533F HUBBCOM™ GSC3100/GSC4100 Dual-Port Flush-Mount Smart Controllers Page 6 of 10 2. Install a clamp on ferrite core around all wires (double wrap) terminating to TB1 as close as possible to the terminal block. 3. Insert each wire into the correct quick release terminal (see Table 1). Table 1.
  • Page 8: 24 V Dc Power

    Pub. 42004-533F HUBBCOM™ GSC3100/GSC4100 Dual-Port Flush-Mount Smart Controllers Page 7 of 10 24 V DC Power Use external 24 V dc power in place of POE (optional) or for smart controllers with external speaker hook-ups (required). Complete the following steps to terminate the 24 V dc power source to the smart controller: 1.
  • Page 9: Activation Without Dhcp

    Pub. 42004-533F HUBBCOM™ GSC3100/GSC4100 Dual-Port Flush-Mount Smart Controllers Page 8 of 10 The HUBBCOM smart controller will reboot to activate. The smart controller takes 40–50 seconds to reboot before the device configuration notification screen displays (see Figure 7). The screen may flicker several times during boot-up.
  • Page 10: Service And Spare Parts

    Pub. 42004-533F HUBBCOM™ GSC3100/GSC4100 Dual-Port Flush-Mount Smart Controllers Page 9 of 10 5. Select the PC’s APIPA assigned network interface from the S ELECT ETWORK NTERFACE dropdown list. 6. Click the F button to perform a device discovery in the GUDA. EVICES An ICON for the new HUBBCOM smart controller appears when the PC can connect to it.
  • Page 11: Reference Documents

    Pub. 42004-533F HUBBCOM™ GSC3100/GSC4100 Dual-Port Flush-Mount Smart Controllers Page 10 of 10 Reference Documents GAI-Tronics publications are located on the GAI-Tronics website at https://www/gai-tronics.com. GAI-Tronics Universal Device Application .................. 42004-531 HUBBCOM Device Configuration Guide ..................42004-551 Model 236-001 Series Surface-Mount Telephone Enclosures ............42004-285 238-001 Series Stainless Steel Surface-Mount Enclosures ............
  • Page 12 Warranty Equipment. GAI-Tronics warrants for a period of one (1) year from the date of shipment, that any GAI-Tronics equipment supplied hereunder shall be free of defects in material and workmanship, shall comply with the then-current product specifications and product literature, and if applicable, shall be fit for the purpose specified in the agreed upon quotation or proposal document.

This manual is also suitable for:

Gai-tronics hubbcom gsc4100Gai-tronics hubbcom gsc3100

Table of Contents