Siemens SIMATIC RF600 Series System Manual page 255

Ordering data
Table 6- 29
Product
SIMATIC RF660A (ETSI)
SIMATIC RF660A (FCC)
Table 6- 30
Product
Connecting cable between
reader and antenna
Antenna mounting kit
6.6.2 Installation
VESA 100 mounting system
A standardized VESA 100 mounting system is provided to mount the antenna. The mounting
system consists of four fixing holes for M4 screws at intervals of 100 mm.
This is therefore suitable for:
● Mounting on metallic and non-metallic backgrounds
Note
To achieve optimum wave propagation, the antenna should not be surrounded by
conducting objects. The area between antenna and transponder should also allow wave
propagation without interference.
Antenna mounting kit
The Antenna Mounting Kit allows the fine adjustment of the antenna field by setting the solid
angle (see "RF600 System Manual", section "Antennas" > "Types of mounting").
SIMATIC RF600
System Manual, 10/2016, J31069-D0171-U001-A19-7618
Ordering data RF660A
Ordering data accessories
1 m (cable loss 0.5 dB)
3 m (cable loss 1.0 dB)
5 m, suitable for drag chains
(cable loss 1.5 dB)
10 m (cable loss 2.0 dB)
10 m (cable loss 4.0 dB)
15 m, suitable for drag chains
(cable loss 4.0 dB)
20 m (cable loss 4.0 dB)
40 m (cable loss 5.0 dB)
See "RF600 System Manual",
section "Antennas" > "Mounting
types"
6.6 RF660A antenna
Article number
6GT2812-0AA00
6GT2812-0AA01
Article number
6GT2815-0BH10
6GT2815-0BH30
6GT2815-2BH50
6GT2815-1BN10
6GT2815-0BN10
6GT2815-2BN15
6GT2815-0BN20
6GT2815-0BN40
6GT2890-0AA00
Antennas
255