Installing The Software Program - Sharp MX-C381 Software Setup Manual

Installing the Software Program

Note the following when installing the software program from the CD-ROM:
●
Be sure to check the system requirements for installation of each of the
software programs in the user's guides and on the Information screen during
installation.
●
The user's guides give detailed instructions for installing and setting up the
programs. Be sure to read the user's guides before installing the programs. In
particular, if you are going to use Network Scanner Tool, be sure to carefully
read the instructions regarding network preparation and setup procedures
before installing the program. The network administrator should verify that
network preparation has been carried out correctly.
●
If you are going to send an original scanned with the Digital Laser Copier/
Printer to a computer (Scan to Desktop), Network Scanner Tool must be
installed.
●
If you perform a standard installation of Sharpdesk (select "Typical" in the
Setup Type selection screen), Network Scanner Tool will be also be installed,
alternatively you can also select "Custom" installation and install only Network
Scanner Tool.
●
If Internet Explorer 6.0 or later is not installed on your computer, see the
installation procedure for Internet Explorer in the Readme file (Readme.txt) in
the root folder of the "Disc 2" CD-ROM.
●
If you intend to install SHARP TWAIN AR/DM, install Network Scanner Tool
first. SHARP TWAIN AR/DM cannot be installed alone.
●
The contents of the Information screens that appear during installation can also
be found in the ReadMe files on the same CD-ROM. The ReadMe file for
Sharpdesk is located in the root folder of the CD-ROM, and the ReadMe file for
SHARP TWAIN AR/DM is located in the Twain folder.
Sharpdesk CD-ROM (for Windows)
75