Problems Related To Audible Signals; The Volume Is Too Low; No Sound Is Heard - Sharp MX-7001N Safety Manual

Problems related to audible signals

Problem

The volume is too low.

• Speaker
• Ringer Volume
• Line Monitor
• Fax Receive
Complete Signal
• Fax Send Complete
Signal
• Fax Communication
Error Signal

No sound is heard.

• Ringer Volume
• Line Monitor
• Fax Receive
Complete Signal
• Fax Send Complete
Signal
• Fax Communication
Error Signal
Point to check
Has the volume setting been set to
"Small" in the system settings
(administrator)?
Has the ringer volume been turned off in
the system settings (administrator)?
Solution
Ask your administrator to set the volumes in "Speaker
Settings" to "Middle" or "Big".
➞ System Settings (Administrator) > "Image Send
Settings" > "Fax Settings" > "Fax Default Settings" >
"Speaker Settings"
Ask your administrator to set the volumes in "Speaker
Settings" to "Small", "Middle", or "Big".
➞ System Settings (Administrator) > "Image Send
Settings" > "Fax Settings" > "Fax Default Settings" >
"Speaker Settings"
45