Printer Specifications - Sharp MX-7001N Safety Manual

Printer specifications

Type
Continuous printing speed
Printing resolution
Printer driver type
Supported protocols
Supported client PC
operating systems
Fonts
Interface port
Memory
Print area
*1 When the PS3 expansion kit (MX-PKX1) is installed and the machine is used as a PostScript printer.
*2 Barcode font kit (AR-PF1) is required.
*3 Supported operating systems are Windows 2000 / XP.
*4 Supported operating systems are Windows 2000 / XP/ Vista.
Built-in
Same as continuous copying speed (When printing same document continuously on A4
(8-1/2" x 11") plain paper in non-offset mode, excluding processing time.)
600 x 600 dpi / 1200 x 600 dpi*
PCL5c, PCL6, PostScript 3 compatible*
TCP/IP, IPX/SPX, NetBEUI, EtherTalk
See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide / Sharpdesk Installation
Manual
PCL5c, PCL6
1
PostScript 3 compatible*
MX-5500N/6200N/7000N
LAN connectivity: 10Base-T / 100Base-TX
USB connectivity: Supports USB 2.0 (Hi speed)*
MX-6201N/7001N
LAN connectivity: 10Base-T / 100Base-TX
USB connectivity: Suports USB 2.0 (Hi speed)*
896 MB (MX-5500N/6200N/7000N) / 1 GB (MX-6201N/7001N)
Entire page excluding margin of 4.2 mm (11/64") at each edge. The actual print area may vary
depending on the printer driver and the software application.
1
(greyscale printing)
1
80 European fonts, 28 barcode fonts*
136 European fonts
3
4
SPECIFICATIONS
2
, 1 bitmap font
15