Finisher Specifications - Sharp MX-7001N Safety Manual

Finisher specifications*

Model
Paper sizes
Paper weight
Modes
Allowed paper sizes for
offset
Offset distance
Upper tray
Tray
2
capacity*
Lower tray
Power supply
Dimensions
Weight
Overall dimensions when
attached to machine
Stapler section
Allowed paper sizes for
stapling
Maximum number of
4
sheets for stapling*
*1 Paper pass unit (MX-PBX2) is required to connect the finisher to the machine.
*2 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of
paper, and the storage conditions of the paper.
*3 Up to 100 sheets of non-standard size paper, envelopes, and transparency film (A4 (8-1/2" x 11")) can be loaded.
*4 The maximum number of sheets for stapling assumes a paper weight of 80 g/m
106 g/m to 256 g/m
2 2
(28 lbs. to 68 lbs.).
1
MX-FNX3
A3W, A3, B4, A4, A4R, B5, B5R, A5R, 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR
Thin paper (55 g/m to 59 g/m
2
heavy paper (106 g/m to 256 g/m
2
24 lbs.))
Non-staple, staple
A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 8K, 16K
30 mm (1-3/16")
3
Non-stapling* :
1550 sheets (A4, B5, A5R, 8-1/2" x 11",
5-1/2" x 8-1/2"R, 16K)
650 sheets (A3W, A3, B4, A4R, B5R, 12" x 18",
11" x 17", 8-1/2" x 14", 8-1/2" x 13",
8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 8K, 16KR)
3
Non-stapling* :
2450 sheets (A4, B5, 8-1/2" x 11", 16K)
1700 sheets (A5R, 5-1/2" x 8-1/2"R)
650 sheets (A3W, A3, B4, A4R, B5R, 12" x 18",
11" x 17", 8-1/2" x 14", 8-1/2" x 13",
8-1/2" x 11"R, 7-1/4" x 10-1/2", 8K, 16KR)
Supplied from the machine
515 mm (W) x 645 mm (D) x 1100 mm (H) (20-9/32" (W) x 25-25/64" (D) x 43-19/64" (H))
Approx. 43 kg (94.8 lbs.)
1775 mm (W) x 715 mm (D) (69-55/64" (W) x 28-9/64" (D)) (When tray is extended)
A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 8K, 16K
(Three stapling positions: one staple at bottom left corner, one staple at top left corner, and two
staples.)
50 sheets (A4, B5, 8-1/2" x 11", 16K)
30 sheets (A3, B4, A4R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"R, 8K)
(30 sheets when the sheets are the same width but different lengths.)
(15 lbs. to 16 lbs.)) plain paper (60 g/m
2
(28 lbs. to 68 lbs.)), envelopes (75 g/m
2
Stapling*
100 sets or 1550 sheets (A4, B5, 8-1/2" x 11",
16K)
50 sets or 650 sheets (A3, B4, A4R, 11" x 17",
8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"R, 8K)
Stapling*
100 sets or 1550 sheets (A4, B5, 8-1/2" x 11",
16K)
50 sets or 650 sheets (A3, B4, A4R, 11" x 17",
8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"R, 8K)
2
(21 lbs.) and includes two cover sheets of
SPECIFICATIONS
to 105 g/m
2 2
(16 lbs. to 28 lbs.))
to 90 g/m
2
4
:
4
:
2
(20 lbs. to
11