Table of Contents
Advertisement
ATTACHING THE BACKPLATE
M2.5 x 7 AX1 SCREW
BACKPLATE
STEP 1
STEP 2
STEP 1
Place the backplate on the PCB and make sure all holes are aligned.
Position an M2.5 x 7 AX1 screw in each of the three (4) mounting
holes (as shown in the image) and tighten them evenly with a
Phillips Head Screwdriver.
For this Step, you will need:
M2.5 x 7 AX1
Screw (4 pcs)
STEP 2
After securing the backplate, place the backplate cover on the PCB
and make sure all holes are aligned. Position an M3 X 12 DIN7991
screw in each of the three (3) mounting holes (as shown in the
image) and tighten them evenly with a Allen Key 2mm. Do not use
excessive force!
For this Step, you will need:
Allen Key 2.0 mm
- 15 -
M3 x 12 DIN7991 Screw (3 pcs)
Advertisement
Table of Contents
Need help?
Do you have a question about the EK-Quantum Vector FE RTX 3080 and is the answer not in the manual?
Questions and answers