Attaching The Active Backplate - ekwb EK-Quantum Vector2 FE RTX 4090 D-RGB ABP Set User Manual

Gpu water block

Hide thumbs Also See for EK-Quantum Vector2 FE RTX 4090 D-RGB ABP Set:

Table of Contents

M2.5-M3 x 6.6

STANDOFF

ATTACHING THE ACTIVE BACKPLATE

F1.5

Thermal Pad - 120 x 16 x 1.0 mm

Thermal Pad - 120 x 16 x 1.5 mm

F1.5

Thermal Pad - 120 x 16 x 2.0 mm

I/O

BRACKET

STEP 3

F1.5

STEP 2

STEP 3

After securing the GPU PCB, position the replacement I/O Bracket

and four (4) M2.5-M3 x 6.6 standoffs. Tighten it with the provided

tool (EK-Plug out Spludger Tool).

For this step, you will need:

EK-Plug Out Spludger Tool

STEP 1

After attaching the water block, a few more thermal pads need to be

placed on the backside of the GPU PCB. Once cut to size, thermal

pads should be placed, as illustrated. EK made sure to provide you

with more than an adequate quantity of thermal pads to complete

this Step.

Replacement thermal pads:

Thermal Pad F 1.0 mm – (120 x 16 mm) EAN: 3830046996732

Thermal Pad F 1.5 mm – (120 x 16 mm) EAN: 3830046996749

Thermal Pad F 2.0 mm – (120 x 16 mm) EAN: 3830046996756

- 13 -

Table of Contents

Do you have a question about the EK-Quantum Vector2 FE RTX 4090 D-RGB ABP Set and is the answer not in the manual?