Joy-it RB-CASEP4+03B Assembly Instructions

RB-CASEP4+03B

Assembly instructions

1. GERNERAL INFORMATION

Dear customer,

Thank you for choosing our product. In the following, we will show you

what to consider during commissioning and use.

Should you encounter any unexpected problems, do not hesitate to

www.joy-it.net

Pascalstr. 8 47506 Neukirchen-Vluyn

Table of Contents

Need help?

Do you have a question about the RB-CASEP4+03B and is the answer not in the manual?

Page 1 RB-CASEP4+03B Assembly instructions 1. GERNERAL INFORMATION Dear customer, Thank you for choosing our product. In the following, we will show you what to consider during commissioning and use. Should you encounter any unexpected problems, do not hesitate to contact us.
Page 2 The magnets will keep it in place. Now stick the enclosed heatsinks onto the Raspberry Pi. The large heat sink belongs on the CPU, the middle sized heatsink on the RAM and the small heat sink belongs on the USB3.0 controller. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
Page 3 At this point, the case can be completely closed. All you have to do is place the cover of the case on the middle piece of the case. Then you are finished with the assembly of your RB- CaseP4+03B. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
Page 4 We will send you a parcel stamp with which you can send us your old ap- pliance free of charge. For this possibility, please contact us via e-mail at pickup@joy-it.net or via telephone, then please dial 02845 93 60 -23 Information about the packaging: Please package your old appliance safe for transport.