Joy-it RB-AlucaseP4+03B Manual

Aluminium housing for the raspberry pi 4

ALUMINIUM HOUSING FOR THE RASPBERRY PI 4

RB-AlucaseP4+03B

1. GENERAL INFORMATION

Dear customer,

Thank you very much for choosing our product. In the following, we will

show you what you need to consider during commissioning and use.

Should you unexpectedly encounter problems during use, please do not

hesitate to contact us.

www.joy-it.net

Pascalstr. 8 47506 Neukirchen-Vluyn

Table of Contents

Do you have a question about the RB-AlucaseP4+03B and is the answer not in the manual?

Page 1 ALUMINIUM HOUSING FOR THE RASPBERRY PI 4 RB-AlucaseP4+03B 1. GENERAL INFORMATION Dear customer, Thank you very much for choosing our product. In the following, we will show you what you need to consider during commissioning and use. Should you unexpectedly encounter problems during use, please do not hesitate to contact us.
Page 2 Now loosen the two upper screws of the second side panel. The upper part of the case can now be pushed out to the side. Loosen the now visible screw to insert and fix the Raspberry-PI. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
Page 3 You now have the choice of placing the GPIO cover on the case or keeping it free. Now attach the removed side panel with the four screws and your case is fully assembled. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
Page 4 We will send you a parcel stamp with which you can send us your old appliance free of charge. For this possibility, please contact us via e-mail at service@joy-it.net or via telephone. Information about Package: Please package your old appliance safe for transport. Should you not...